XLR plugg, Neutrik, hun, 3-pins

kr 56,25

inkl. mva


Industri-standarden blant XLR-kontakter! Her trengs ikke verktøy.Med bare 4 deler og ingen skruer er den veldig enkel å sette sammen etter at kablene er loddet på plass.




  • Kompakt design med solid metall «hus» 


  • Glassfiber-forsterkede plastdeler.


  • Genial strekk-avlaster sørger for problemfri bruk over lang tid uten belastning av loddepunktene


  • Sølv kontakter 


  • Inntil 2,5 mm² kabel

Varenummer: 610717-HUN-NEU Kategorier: , ,

The «industry standard» XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.

3 pole female cable connector with Nickel housing and silver contacts.


Features & Benefits

  • Rugged zinc diecast shell, long lasting and durable
  • Chuck type strain relief system for secure clamping of cables
  • Boot with rubber gland gives high protection against bending stresses
  • Coloured rings and boots available for coding and marking
  • UL recognized components
Product

  • Connector Type: XLR
  • Gender: female
Electrical

  • Capacitance between contacts = 4 pF
  • Contact resistance = 3 mO
  • Dielectric strength 1,5 kVdc
  • Insulation resistance > 2 GO (initial)
  • Insulation resistance > 1 GO (after damp heat test)
  • Rated current per contact 16 A
  • Rated voltage 50 V
Mechanical

  • Cable O.D. 3.5 – 8.0 mm
  • Insertion force = 20 N
  • Withdrawal force = 20 N
  • Lifetime > 1000 mating cycles
  • Wire size max. 2.5 mm²
  • Wire size max. 14 AWG
  • Wiring Solder contacts
  • Locking device Latch lock
Material

  • Boot Polyuretan
  • Bushing Polyamide (PA 6 15% GR)
  • Contact plating 2 µm Ag over 2 µm Ni
  • Contacts Bronze (CuSn8)
  • Insert Polyamide (PA 6.6 30 % GR)
  • Locking element St3K32 (latch) / Ck 67 (spring)
  • Shell Zinc diecast (ZnAl4Cu1)
  • Shell plating Nickel
  • Strain relief Polyacetal (POM)
Environmental

  • Approvals UL
  • Flammability UL 94 HB
  • Standard compliance IEC 61076-2-103
  • Protection class IP 40
  • Solderability Complies with IEC 68-2-20
  • Temperature range -30 °C to +80 °C

Handlekurv
Rull til toppen